Articles
FGRE: Connecting to the WiMAX Network
In order to connect to the Base Station, issue the following commands:
wget --http-user admin --http-password admin -qO - "http://192.168.0.1/cgi/cli?stopSs" wget --http-user admin --http-password admin -qO - "http://192.168.0.1/cgi/cli?addChannel frequency=2590000 bandwidth=10" wget --http-user admin --http-password admin -qO - "http://192.168.0.1/cgi/cli?startSs"
The first one, instructs the dongle to disconnect from any network that it is attached on. The second command, instructs the dongle to use the WiMAX channel at 2590MHz with a 10MHz channel bandwidth. Finally, with the third command the dongle connects to the NITOS WiMAX network.
You can verify that the dongle has connected by sending the following command:
ping 192.168.55.3
If the host responds, you are connected to the Base Station. Host 192.168.55.3 is the server behind the Base Station, responsible for configuring it and routing the traffic coming from it.
