Friday, November 22, 2024

youtube

   
Text Size

Search

Total: 50 results found.

Search for:
Search Only:

Page 1 of 3

1. Configuring Datapaths
(LTE Documentation)
... By default, when the nodes have the appropriate routing rules to use as a default gateway the EPC network, all traffic not destined to the LTE network is sent to the Internet. In case you set the datapath ...
Created on 18 November 2015
2. Updating BS - EPC routing
(LTE Documentation)
... the nodes connect to (aka. eth1). You can easily update the configuration to the EPC and the BS in NITOS, in order to use another node as their gateway to the EPC (or even as the EPC and do some rewritting ...
Created on 18 November 2015
3. Configuring a new APN
(LTE Documentation)
...  460990010001010 This configuration is subject to change. You should verify that the nodes that you want to connect to the LTE network have these IMSIs. To do so, open a terminal on the node and ...
Created on 18 November 2015
4. FGRE 2015: Tutorial
(FGRE Tutorial 2015)
... the tutorial, you can contact Donatos Stavropoulos (This email address is being protected from spambots. You need JavaScript enabled to view it. ).  The topology of the experiment consists of 6 nodes and is illustrated in the figure below. In particular, 2 senders, ...
Created on 26 June 2015
5. Simple LTE Tutorial
(Testbed)
... the LTE eNBs and the nodes with LTE connectivity, offered by the Outdoor and Indoor RF isolated testbeds. Reserving the eNBs will render rights to the experimenter to access the LTErf service of the ...
Created on 21 May 2015
6. Cloud Computing
(Testbed)
... storage of 7TB. The interconnection of the shared storage and computer controller nodes is using a 10Gbps connection. The NITOS cloud is part of the FIWARE XiFi federation.     Picture ...
Created on 09 March 2015
7. C2M: Mobile Data Offloading to Mesh Networks
(Publications)
... mesh nodes in this joint task. We evaluate our work by simulating the operation of the LTE-A network, and conducting testbed experimentation for the mesh network. The results reveal significant savings ...
Created on 18 December 2014
8. NITOS BikesNet: Enabling Mobile Sensing Experiments through the OMF Framework in a city-wide environment
(Publications)
... can remotely reserve and control the sensor nodes on bicycles as well as collect/visualize their measurements via the OMF/OML framework, which was extended in order to handle the intermittent connectivity ...
Created on 26 September 2014
9. FGRE: Collecting Performance Statistics
(FGRE Tutorial - 2014)
Now that you are connected to the network, you can start collecting measurements regarding the link quality. As the nodes are physically located in the same building, but in different floors and rooms, ...
Created on 03 July 2014
10. FGRE: Visualizing an Experiment's Measurements
(FGRE Tutorial - 2014)
Experiments involving multiple nodes, demand that the measurements collected from them are in an organized way. For this purpose, we will employ the OML library responsible for collecting measurements ...
Created on 03 July 2014
11. FGRE: Accessing the NITOS testbed remotely
(FGRE Tutorial - 2014)
NITOS server is remotely accessible, and the experimental nodes available for reservation 24/7. In order to access the server, you can use the credentials that have been handed out to you and issue the ...
Created on 03 July 2014
12. FGRE: NITOS testbed Introduction
(FGRE Tutorial - 2014)
... validation of novel protocols and ideas. The main experimental components of NITOS are: A wireless experimentation testbed, which consists of powerful nodes, that feature multiple wireless interfaces ...
Created on 03 July 2014
13. WiMAX tutorial
(OMF Tutorials)
Using the WiMAX testbed In order to use the WiMAX testbed resources offered by the NITOS facility, you will have to reserve the WiMAX base station and the nodes with WIMAX connectivity, offered by the ...
Created on 17 June 2014
14. Broker Rspecs
(Instructions)
... we can come to the conclusion that: Two nodes are available (node0 and node1) node0 has one interface with ip 10.0.1.0 node1 has one interface with ip 10.0.1.1 Channel 1 is available with ...
Created on 10 June 2014
15. Integration of IRIS in OMF
(Testbed)
... here. In order to install our extensions, add the following repository in your your target machines (server and nodes), in the respective "/etc/apt/sources.list" file.  deb http://nitlab.inf.uth.gr/ubuntu ...
Created on 10 June 2014
16. Tutorial
(Testbed)
The following guide sets up the reserved nodes to operate with the ITS stack components. Once you have received a slice and reserved some testbed nodes, you can load the geonet.ndz image on the testbed ...
Created on 10 March 2014
17. Overview
(Testbed)
... rest type of packets are triggered when receiving an appropriate indication by the facility layer. TSB messages are used for broadcasting messages to nodes located more than one hop away. GeoBroadcast ...
Created on 10 March 2014
18. OpenFlow switches
(Hardware)
... (a.k.a. nodes) is connected to one of the two switches. A suitable convention has been adopted, connecting half of the nodes to the first switch and the other half to the second one.  ...
Created on 10 January 2014
19. A Demonstration of a Management Tool for Assessing Channel Quality Information in Wireless Testbeds
(Publications)
... useful information about choosing nodes that occasionally satisfy the requirements (link quality, connectivity) needed, for their  experiments. NITOS connectivity tool is a full-fledged managerial tool ...
Created on 09 January 2014
20. WiMAX end-devices
(Testbed)
Apart from the Base Station’s components, NITlab has also acquired several end-devices able to operate as WiMAX clients. This equipment is installed at NITOS testbed, enhancing existing nodes capabilities ...
Created on 06 January 2014